Currently the 2" Hitch Cap Sensor # C56UR and 2-1/2" Hitch Cap Sensor # C36UR for GMC Sierra MultiPro and Chevy Silverado Multi-Flex Tailgates do not have any available replacement parts. You will need to get the entire kit to replace the sensor cap on your 2021 GMC Sierra 3500. view full answer...
The WeatherTech Mud Flaps # WT69BV include both the front and rear mud flaps for your 2024 GMC Sierra 3500. The rear are specifically designed with your single rear wheels in mind. view full answer...
I have a solution for you, but there are no custom extendable towing mirrors like the K-Source # KS62137-38G that are available for the 2019 GMC Sierra 2500 Duramax trucks. I recommend using the CIPA Custom Towing Mirrors # CM10950 that slip on over your existing mirrors and provide you with a mirror that fits snugly on your existing side mirrors. These are a great option for trucks that cannot have the entire mirror replaced or those that would lose a lot of the powered functions if they... view full answer...
I spoke with my contact at Titan Chains and confirmed that Titan Chain Tire Chains w Cams - Wide Base and Dual Tires - Ladder Pattern - Twist Link - 1 Axle Set # TC3231CAM would work for your 37x12.5r20 tires. For your 32x10r14 tires you will want to go with Titan Chain Tire Chains w Cams - Wide Base and Dual Tires - Ladder Pattern - Twist Link - 1 Axle Set
Item # TC3235CAM. These are pretty much your only options for tire chains since you have some rather large and odd tire sizes. I attached... view full answer...
I called my contact at Access and the side gaskets that are included in the # 834532001453, are not available as a separate item. They are only available in the complete kit. view full answer...
I have a solution for you, but installing and then removing the bed rails after each use is going to cause undue stress on the hardware components on the bed rails; these components are designed to be installed once and discarded after installation, so there isn't going to be a rail kit that can be used in this manner. For this reason, I can't recommend using a kit with above bed rails like the B&W # BWRVK2505, which provides industry standard 5th wheel rails to mount a hitch in and instead... view full answer...
To cover that height difference, you'll need a ball mount that offers a drop of at least 13 inches. The most economical option we offer is the # HD2514 adjustable ball mount from BulletProof. The ball mount offers a maximum drop of 14 inches which would be perfect for your needs. The ball mount is compatible with 2-1/2 inch receivers, and includes a 2 inch and a 2-5/16 inch ball.
You can see a demonstration video by using the provided link. view full answer...
Since you have a Demco Recon for the recessed ball you could use the Demco Recon Base part # DM6201 that you mentioned to replace the base and attach it to the gooseneck ball of your 2023 GMC Sierra 3500. view full answer...
The Master Lock Trigger Style Coupler Lock # 605DAT is only available as keyed unique. For a keyed alike option you can look at the etrailer Trailer Coupler Latch Lock # e98889. view full answer...
I have a solution for you, however Reese does not currently offer adapter rails for the factory installed rail kit on your 2016 GMC Sierra 3500. I did speak with our contact at Reese and he informed me that they are working on this but there is no release date as of early 2017.
With the products on the market now, I recommend the Curt 20K Fifth Wheel Trailer Hitch # C16541 along with the installation rails, part # C16023. This is a sliding 5th wheel hitch that is custom fit for your 2016... view full answer...
The one front-mount hitch available for your 2015 GMC Sierra 3500 Denali is the Curt model # C31071. This offers no-drill installation and the linked video will show you the process and final appearance.
There is a Draw-Tite hitch offered # 65078 but this is not a fit for the Denali.
If you plan to use a heavy front-mount accessory such as a plow or cargo carrier you might consider a front-axle suspension kit like a set of rubber jounce springs such as # SSF-202-47. This no-drill kit... view full answer...
I may have a solution for you, but there is not an adapter available to make a 2-1/2" receiver into a 3" receiver. The only way to get a 3" hitch receiver would be to move to a hitch like the Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receiver - 20K - 12" x 11-1/4" Wings # 38023, which is built for frame widths from 33-1/2" to 34-1/2". You would need to measure the distance between your frame rails on your 2020 GMC Sierra 3500 to determine which Super Titan you would need.
If you'd like... view full answer...
The B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package - Dual Jaw - 25,000 lb., # BWRVK3715, is for GM 8 Foot Bed with OEM Prep Pkg. If you have the short bed version you may not need a slider but in most situations you do. Please note the needed clearance for specific vehicle and RV combination to ensure a slider is not needed.
For 6-3/4' bed in B&W brand we have the B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package - Dual Jaw - 20K, #... view full answer...
The highest capacity hitch offered for the 2015 GMC Sierra 3500 long bed would be the Curt A25, part # C16180 with a 25K capacity. To install the hitch, you'd need the # C16411-204 bracket/bed rail kit.
If you needed the sliding version, you'd use # C16566, but because the slider assembly's capacity is 24K, you'd be limited to that capacity. view full answer...
1474001 is TruXedo's part number for TruXedo Pro X15 Soft Tonneau Cover - Roll Up Matte Black # TX79YR, which is confirmed to fit your 2021 GMC Sierra 3500 with the 8' bed and MultiPro Tailgate. This is a really nice rolling cover which installs very simply onto your bed rails, requiring no drilling. view full answer...
We have two Retrax tonneau covers available for your 2022 GMC Sierra 3500 with 8' bed. The RetraxPRO XR Hard Tonneau Cover # RTT-80485 and the RetraxPRO MX Hard Tonneau Cover # RT80485. Both covers are made in the USA, feature a no-drill installation and will provide you with a retractable cover allowing full use of your truck bed in seconds.
The difference between the two covers is that the RetraxPRO XR Hard Tonneau Cover # RTT-80485 has an integrated track system to allow you to use... view full answer...
I have a great solution for you, but the Curt rail kit adapter you mentioned only fits Curt slider hitches. What you'd want is the Demco Rail Kit adapter part # DM6194 which is a fit for the factory rail kit of your 2018 GMC Sierra 3500 short bed and is compatible with the ISR style of Pullrite hitches like your 2900. view full answer...
Since you have a 2 speed Bulldog landing gear set the powered drive kit you'd need is the part # BD1824180100.
With this kit you can only use the power drive with a single speed of the jack. In manual mode though you can use it in both speeds. view full answer...
Yes, we do carry the Curt PowerRide 5th wheel hitch that you are needing for your 2023 GMC Sierra 3500 with 8' bed and factory 5th wheel prep package.
- Curt PowerRide 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package # C36WR
This 5th wheel hitch has an interlocking 2-jaw system that provides 360-degree jaw-to-king-pin contact, will drop into the pucks of your prep package and has a 30,000 lb. capacity. view full answer...
I may have a solution for you, but as of April 2021 there are not any powered retractable tonneau covers that are available for a 2021 GMC Sierra 3500 DRW. I'll add that I do believe you might have issues finding a transfer tank/tool box combo that is short enough to fit under a tonneau cover and also does not interfere with the cannister on a retractable cover. I do believe the reason that the # PE62CV won't function with the DRW models is the bed rails are slightly different on those... view full answer...